For Sales Enquiry
   

News

Dangerous Prevention Of Metal Stamping Parts Processing

Update:07-10-2019
Summary:

  Metal stamping parts processing is dangerous, but it […]

  Metal stamping parts processing is dangerous, but it is not dangerous. It complies with the stamping processing system and is suitable for operation. Stamping processing is still very safe.

  During the processing of metal stamping parts, for the sake of safety, pay attention to the adjusting screw of the slider, and do not let it extend too long.

  In the processing of metal stamping parts, to prevent the mold from moving, it is possible to put a layer of paper on the reinforcement, and the rotation of the mold is a dangerous situation. For the safety of metal stamping parts, the mold must be disassembled until the machine is completely stopped.

  When processing metal stamping parts, if you need to adjust and install the mold, you must first turn off the power supply in action, although it can be carried out without turning off the power, but the danger index will increase greatly, so for safety, be sure to turn off the power completely. Operate after the machine has completely stopped running.

  In the processing of metal stamping parts, the existence of fastening screws will have a certain guarantee of the safety of metal stamping parts processing. To make this protection not a hidden danger, the fastening screws must be tightened frequently to ensure the fastening. Screw to provide a safety feature.

  NINGBO STARLITE MACHINERY TECHNOLOGY CO.,LTD. be a professional manufacturer mainly engaged in stamping, welding, injection molding and SMC, BMC injection molding and assembly, etc. We will tell you your need, we will provide you with the answer to the first time, bring you Go to the intimate service.